Lighting, Console & Effects Repair – North West & North Wales
Professional moving head repair, console repair & effects servicing across the North West & North Wales. Fast, reliable repairs for venues, hire companies, DJs and theatres.
What I Repair
Lighting Fixtures
- Battens
- LED Pars
- Moving Heads
- Strobes
- Washes
Consoles
- Avolites
- Chamsys
- MA Lighting
Effects
- Atmospherics
- Fans
- Foggers
- Hazers
Brands I Repair
- ADJ
- Avolites
- Ayrton
- Chamsys
- Chauvet
- Clay Paky
- Cameo
- Chroma-Q
- Elation
- Equinox
- GLP
- JEM
- Look Solutions
- MA Lighting
- Martin
- Portman
- Prolights.it
- Prolight Concepts
- ROBE
- SGM
- Smoke Factory
- & More
Why Choose RCL Tech Repair
- Manufacturer trained on Chauvet, Clay Paky, Robe & more
- Fast turn around with clear diagnostics & communication
- Honest triage – NO unnecessary parts replaced
Serving the North West & North Wales
Including Northwich, Crewe, Warrington, Chester, Liverpool, Manchester, Wrexham, Llandudno and surrounding areas
Services Overview
Lighting Fixture Repair
- Diagnostics
- Repair
- Calibration
- Testing
- Service
- Deep Clean
Console Repair
- Diagnostics
- Repair
- Testing
- Service
- Deep Clean
Effects & Atmospherics
- Diagnostics
- Repair
- Testing
- Service
- Deep Clean
How it works
- 1: Contact me
- 2: Send or Drop off your equipment
- 3: I diagnose the fault and send you a quote
- 4: I repair, test and return your kit ready for shows
Need a Repair?
Get a fast diagnostic and clear quote for your lighting, console or effects repair.
Chauvet Rogue Outcast 1 BeamWash in for a DMX passthrough fault.
Issue traced to corrosion on the DMX out connector, causing intermittent signal loss through the chain. Connector cleaned and contacts restored.
Unit now passing DMX reliably.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Five ADJ 32 Hex Up units in for temp errors and missing LEDs.
Faults traced to individually failed LEDs, which were replaced. Temperature errors were caused by driver PCBs being installed in the wrong order during a previous repair, preventing correct thermal reporting.
All units now running with full LED output and stable temperature readings.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Avolites Tiger Touch and Tiger Touch Wing in for full service.
Both units stripped for internal clean, fans checked, faders and encoders inspected, and all boards cleared of dust. Firmware confirmed up to date as to what the hardware would allow and all functions tested across both surfaces.
Consoles now running smoothly and ready for show use.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
GLP JDC‑1 in for a missing red segment.
Fault traced to a failed LED driver card and it’s inline fuse that had also blown, preventing the red section from receiving power. Driver card replaced and fuse swapped.
Unit now outputting correctly across all colour segments.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Astera AX3 8‑way charging case in for a charging fault.
One of the charging pins was broken, preventing the affected slot from making contact with the fixture. Pin replaced and alignment checked across the bank.
Case now charging correctly on all positions.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Astera AX3 8‑way charging case in for a charging fault.
One of the charging pins was broken, preventing the affected slot from making contact with the fixture. Pin eventually completely snapped off. Pin replaced.
Case now charging correctly on all positions.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Anytronics Quad Pro Dim 2.5 in for no output on channel 4.
Fault traced to a broken wire going into the output socket, causing the channel to drop out. Wire repaired and connection secured.
Unit now outputting correctly on all channels.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Elation Rayzor Blade S in for DMX passthrough faults.
DMX pins showed corrosion causing intermittent signal loss. The 1U passthrough PCB also had a loose connection affecting the DMX chain.
Pins cleaned, corrosion removed and the PCB connection secured. Unit now passing DMX reliably.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
One Road Hog 4 and one Nano Hog in for full service.
Both consoles stripped for internal clean, fans checked, faders and encoders inspected, and all boards dust‑free. Firmware confirmed up to date and both units tested across all functions.
Both console and wing now running smoothly and ready for show use.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk